Dongguan CNC factory so far, all discussions assume that the absolute programming method is adopted. The most common NC code used to specify absolute mode is G90. In absolute mode, all the movement end points are specified at the start point of programming zero. For beginners, this is usually the...

As a kind of processing method to produce shape, machining is the most common and important method in all manufacturing processes. Machining process is a process of generating shape. In this process, the driving device makes some materials on the workpiece be removed in the form of chips. Althoug...

According to the numerous brittle and edge cracked tools that have been treated in Dongguan CNC processing plant, there are basically three forms of tool wear: flank wear, rake wear and V-notch wear. The flank wear occurs on both the main and secondary cutting edges. As for the main cutting edge,...

In order to achieve layer by layer solidification or avoid shrinkage holes, chill is often used in castings in Guangdong mechanical processing plant. In essence, cold iron is a large heat source. At any time, it is impossible to provide a chill for a part of a heavy casting. The chill is in close...

Processing speed and feed rate, feed rate and cutting depth are three variables of economic processing in Dongguan CNC plant. Other quantities are tapping and tool material, coolant and tool geometry, speed of metal removal and power required depending on these variables. Cutting depth, feed rate...

1 NC machining method For sheet metal processing, Dongguan CNC processing plant mainly has the following processing methods: (1) Single stamping, that is to say, single stamping includes arc distribution, grid hole and so on. (2) The continuous blanking is divided into the same direction and mult...

Centrifugal casting is composed of sand, metal or ceramic mold with rapid baking. When liquid metal is poured into the mold, it contacts the mold wall until it cools and solidifies. This process of Dongguan CNC processing plant is increasingly widely used in the production of these products: cast...

When back to reference point fault occurs in the operation of CNC machine tools in Guangdong Machinery processing plant, it mainly occurs in the above aspects. According to the principle of back to reference point, we can check step by step in order to find the key point and use the correct metho...

The operation and monitoring of CNC machine tools in Dongguan CNC machining plant are all completed in this CNC unit, which is the brain of CNC machine tools. Compared with ordinary machine tools, CNC machine tools have the following characteristics: High machining accuracy and stable machining q...