The whole system includes mechanical structure and electrical control system.
Mechanical structure and working principle of Guangdong mechanical processing plant: tool magazine is composed of support, drive mechanism, transmission system, tool carrier, shield, electrical control system, etc. The support is composed of column, beam, upper and lower guide ring rail and supporting ground rail.
1) Guangdong mechanical processing plant drive mechanism: the system adopts the method of frequency conversion speed regulation. It adopts cone brake motor with frequency control, cycloid pin wheel reducer and sprocket drive.
2) Drive and transmission system: frequency conversion control technology. The speed of the drive shaft can be adjusted within the normal range by frequency conversion, so that the rotation speed of the tool rest can be controlled to 5 ~ 30mm in. The two drive shafts each have two sprockets to drive the shelf to rotate through the two special-shaped roller chains. The chain expansion mechanism adopts thread adjustment expansion, which is a regular expansion mode. When adjusting, the looseness of the upper and lower chains is adjusted in the same way, so that the chain is evenly stressed.
3) Guangdong machining factory tool holder and protective cover: there are 14 independent tool holders in the whole warehouse. Among them, 13 rows are socket type turrets and 1 row is drawer type turrets. The back of each turret is connected with the upper and lower conveying chain plates through pin shafts. Rollers are installed at the bottom. The chain rotation drives the turret to rotate along the ground rail. Socket turret is divided into BT40 turret and BT50 turret. In order to strengthen management, ensure safety and beautify modeling, protective cover is added around the shelf. The drawer type tool holder is divided into six drawers to place other tool aids, which can be classified to store some tool aids, such as drills, turning tools, etc.